Electric installation work of Kiev

The final stage of electrical work are the electric measurements. All electrical installations before putting into operation after all the work shall be inspected by specialists on the performance. Measurement and inspection engineers required, for each of the electrical installation, to permit it in operation. Without the technical report on the testing, the electrical installation is not commissioned. Diagnosis and testing help to identify the problem. errors and eliminate them. On the basis of all work prepared a technical report, and issued the necessary recommendations to address the deficiencies. ETL-112 executes the test in Ukraine.
All electrical measurements our lab is pursuing in accordance with the regulations of pteep, PUE. The results are presented in the protocols signed and sealed. The tests are carried out only by experienced personnel. All of the foregoing work is carried out with the aim of preventing accidents, fires, etc.. Regular checking of the loop phase-zero, measurements of insulation resistance, measurement of earth resistance largely reduces the risk of breakage and shock.
The results of electrical work, our lab is testing protocols of measurement. Electric measurements are the key to safe operation of electrical equipment and power tools. Most of our customers are trying to time to check the insulation resistance of the cable, the test loop phase-0, the resistance of the ground loop. It is necessary always and that is why our electrical laboratory "112" is always ready to work.